Description
- tapered fork steerer tube 1-1/8″ – 1.5″ which increases strength and gives the fork great stiffness!
- the fork steerer tube is supplied with 2x layer of kevlar, to increase the resistance of the surface
- inside the fork neck there is an integrated star nut, so there is no need for additional installing of it
- fork crown with 45° ramp system for lower headset bearings
- the lower headset crown race does not need to be fitted to the fork and the bearing sits directly on the fork crown
- 4-bolt IDM mounting for rim hydraulic brake
- brake mounting is integrated into the rear of the fork legs
- fork dropouts are designed for 12mm thru-axle hubs – also for bolt-on hubs after changing inserts
- UD (undirectional) carbon with silver CLEAN graphics
DImensions
- lenght (from crown race to the hub axle): 400mm
- distance between brake mounts: 92mm
- dropouts distance: 104mm
- lenght of steerer tube: 180mm
- weight: 503g (uncuted steerer tube 180mm)
- for thru-axle: 12mm
Change to bolt hub
If you need to modify the fork for a hub with bolts, it is necessary to purchase fork inserts that allow this modification see.: INSERTS / ADAPTERS IN TO FORK CLEAN | VERTICAL DROPOUTS
Reviews
There are no reviews yet.